^SynOhrMultiSenseKNX-Eng-13.odt, 2014-05-06 Page 28 of 49
ID
Function
Name
Length
Type
Flags
155 Dimming/Blind
Command Button right / 4 bits
4 bits
[3.7] DPT_Control_
Dimming/ [3.8]
DPT_Control_Blinds
-WCTU-
Via this object 4 bits telegrams can be sent when pressing the right touch button. Depending on the configuration
dimming increase / decrease or blind up / down are possible.
Note:
This object is only available if:
•
the parameter „Button → Mode Button right“ is set on
Command
and the parameter „Button → Command
Button right“ is set on
Dimming,
•
the parameter „Button → Mode Button right“ is set on
Commando
and the parameter „Button → Command
Button right“ is set on
Blind
.
Licenses:
Starter, Standard, Premium
ID
Function
Name
Length
Type
Flags
156 Percent Value
Scene
Command Central Button / 1 byte
8 bits (u08) [5.1] DPT_Scaling/
[18.001]
DPT_SceneControl
-WCTU-
Via this object 8 bits telegrams can be sent when pressing the central button. Depending on the configuration a
percent value or a scene are possible.
Note:
This object is only available if:
•
the parameter „Button → Mode Central Button“ is set on
Command
and the parameter „Button →
Command Central Button“ is set on
Percent Value,
•
the parameter „Button → Mode Central Button“ is set on
Command
and the parameter „Button →
Command Central Button“ is set on
Scene
.
Licenses:
Starter, Standard, Premium
ID
Function
Name
Length
Type
Flags
157 Percent Value
Scene
Command Button left / 1 byte
8 bits (u08) [5.1] DPT_Scaling/
[18.001]
DPT_SceneControl
-WCTU-
Via this object 4 bits telegrams can be sent when presseing the left touch button. Depending on the configuration a
percent value or a scene are possible.
Note:
This object is only available if:
•
the parameter „Button → Mode Button left“ is set on
Command
and the parameter „Button → Command
Button left“ is set on
Percent Value,
•
the parameter „Button → Mode Button left“ is set on
Command
and the parameter „Button → Command
Button left“ is set on
Scene.
Licenses:
Starter, Standard, Premium
ID
Function
Name
Length
Type
Flags
158 Percent Value
Scene
Command Button right / 1 byte
8 bits (u08) [5.1] DPT_Scaling/
[18.001]
DPT_SceneControl
-WCTU-
Via this object 8 bits telegrams can be sent when pressing the right touch button. Depending on the configuration a
percent value or a scene are possible.
Note:
This object is only available if:
•
the parameter „Button → Mode Button right“ is set on
Command
and the parameter „Button → Command
Button right“ is set on
percent value
,
•
the parameter „Button → Mode Button right“ is set on
Command
and the parameter „Button → Command
Button right“ is set on
Scene.
Licenses:
Starter, Standard, Premium
ID
Function
Name
Length
Type
Flags
159 on/off
Speech Recognition active
1 bit (b01)
[1.1] DPT_Switch
RWCT--
This object specifies whether the speech recognition is active or inactive. Telegrams are sent automatically when the
state changes. In addition the speech recognition can be activated or deactivated via this object.
The object value is 1 if the speech recognition is active.
The object value is 0 if the speech recognition is inactive.
Licenses:
Starter, Standard, Premium
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - [email protected]
