^SynOhrMultiSenseKNX-Eng-13.odt, 2014-05-06 Page 16 of 49
Menu
Structure on
the Device
Operation
On the device some settings can be made directly, for that are in each case the main menu and
sub menu items.
With a long keystroke (approximately 3 seconds) of the central button you get to the menu level
which is left automatically after 2 minutes without input respectively via the menu item „Exit“. If
the central button is pressed longer than 1 second, so a bargraph appears in the dot matrix. If
this is filled out completely, the three seconds have elapsed for changing the menu level and
takes you on release automatically to the second menu level.
With the touch button as you scroll in the first menu level. The scrolling is endless at the upper
and lower end, i.e. reaching the last point so start pressing again at the first respectively the
other way round.
Pressing the central button to access the submenu that you leave by long button-press. By
pressing again you get into the setting of the submenu item. There the values are displayed or
changed.
If you are in the menu level, the numeric display shows each the level and the submenu in the
form Mainmenu. Submenu e.g. 1.02.
The touch buttons work per step function (with small dead time) and key repeat. The key repeat
is switched off after about 7 seconds and there will be a relaese and possibly re-touching of the
touch keys necessary.
Menu
Structure
Numerical
display
Display
1. Menu level
Display
2. Menu level
Explanation
Displayed values
(bold values are default
settings)
1
CONTROL
1.01
SETPOINT
Basic setpoint
Adjustment from 7°C to 40°C
(
21°C
)
1.02
NIGHT H
Heating temperature at night
Setting of 0K to 25,5K in 0,1 K
steps (
2K
)
1.03
STBY H
Heating temperature in the
standby mode
Setting from 0K to 25,5K in 0,1
K steps (
2K
)
1.04
NIGHT C
Cooling temperature at night
Setting of 0K to 25,5K in 0,1 K
steps (
2K
)
1.05
STBY C
Cooling temperature in the
standby mode
Setting of 0K to 25,5K in 0,1 K
steps (
2K
)
1.06
UP
Exit the menu
Up one level
2
DISPLAY
2.01
LCD
LCD-brightness
LCD dimming of 0 to 100%
(
25%
)
2.02
AUTO
LCD dim depending on the
ambient light
ON
/ OFF
2.03
AMBIENT
Ambiente-RGB LEDs light
intensity
0 to 100 % (
50%
)
2.04
RGB
RGB light intensity of the front
lighting
0 to 100 % (
50%
)
2.05
AUTOAMB
Control ambiente-RGB LEDs on
the ambient light level
ON
/ OFF
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - [email protected]
