EnerSys Outback Power EnergyCell 1000XLC, Руководство пользователя, Страница: 7 / 36

Introduction
900-0258-01-00 Rev A
7
Materials Required
Tools (use insulated tools only)
o
Digital voltmeter
o
Drill
o
Hammer
o
Level
o
Socket wrench
o
Torque wrench calibrated in inch-pounds
o
Box end wrench
o
Battery lifting equipment (eyebolts and straps) and fork lift to lift battery modules
o
Rubber gloves
o
Full face shield
o
Plastic apron
o
Portable eyewash
o
Spill kit
o
Fire extinguisher (class C)
Accessories
o
Interconnect bar (included)
o
Terminal cover (included)
o
Hardware (included)
o
Support bars (included)
o
Beams (included)
o
Insulators (included)
o
Upper shield (included)
o
Bus bars and safety covers (included)
o
Dielectric grease (included)
o
Grounding Wire
o
Cables
CAUTION: Fire Hazard
Install properly sized battery cabling and interconnect cables. The cable ampacity
must meet the needs of the system, including temperature, deratings, and any other
code concerns.
Storage and Environment Requirements
Temperatures
o
Optimal operating temperature is 77°F (25°C); maximum temperature range is
–4° to 104°F (–20° to 40°C).
o
Do not allow batteries to freeze, as this will damage them and could result in leakage.
o
Do not expose batteries to temperature variations of more than 5°F (3°C). This leads to voltage
imbalance between multiple batteries (or between battery cells if there is a temperature differential).
o
Batteries should be stored in a cool, dry location.