2-2 Interpreter Console // IC-12
19.
CLEAR/ ENTER Key:
In OPEN Mode (See 28 below), it serves as the CLEAR key to clear the active channel of the
interpreter console. When the console is not going to be used and an output channel had been
selected, then push the ENTER key to deselect active channel.
In LOCK Mode (See 28 below), it serves as the ENTER key to set the active channel of the
interpreter console (when the MODE switch is in Lock Mode, and the Set switch is in the ON
position).
20.
Outgoing Channel Selector:
In OPEN Mode, it allows the interpreter to select the desired outgoing channel as long as it is not
occupied by another booth. When a channel is selected the corresponding key light goes green.
When attempting to select an occupied channel, the light will flash red.
Note: If the microphone is OFF, the active channel will be released if an interpreter from another
booth selects the same channel.
Relay Channel Selector: It allows the selection of the incoming channel for the interpreter to
listen when pressing the Relay key.
21.
Headphone Volume Control (VOLUME A, VOLUME B): It is used to adjust the volume of the
headphones.
4
