Enerpac NC-1924, Инструкция

Страница: 3 / 52

3
3.0 DESCRIPTION
All Enerpac Nut Splitters are single-acting, hydraulic-advance,
spring-return units. Hydraulic power can be supplied by hand,
electric, or air-powered pumps capable of 10,000 psi output
pressure.
Enerpac Nut Splitters consist of a two-piece threaded body,
cutting blade, return spring, plunger, oil seal, and CR-400 coupler
half. Spare setscrews, a spare blade and wrenches for removing
and replacing the blade, are included with the nutsplitter. Each
blade is made of high quality steel and can be re-sharpened using
a grinding tool.
4.0 OPERATION
1. Connect the nut splitter coupler to the hose coupler.
2. Firmly tighten the couplers to prevent restricted oil flow.
NOTE: Pump vent/fill cap must be in the “VENT” position for
proper pump functioning.
3. Close the pump release valve.
NOTE: To remove air trapped in the pump, hose, or cutter,
freely advance and retract the cutter blade several times.
4. Place the nut splitter head over the nut.
NOTE: The flat surface of the cutter must rest flush against
one of the nut flats, and the head must rest on a flat surface.
See Figure 1 for correct and incorrect placements.
Specifications - Dimensions in Inches (mm)
Model Bolt Range Nut Range Capacity Weight A B C D F H J
No. in (mm) in (mm) (tons) lb (kg)
NC-1924D
1/2 - 5/8 3/4 - 15/16
10 8.4 2.13 6.61 .87 .89 1.97 2.60 1.02
(M12-M16) (19-24) (3.8) (55) (168) (22) (23) (50) (66) (26)
NC-2432D
5/8 - 7/8 15/16 -
1
1/8
15 11.9 2.52 10.83 .89 1.22 2.56 3.07 1.30
(M16-M22) (24-32) (5.4) (64) (275) (23) (31) (65) (78) (33)
NC-3241D
7/8 -
1
1/8
1
1/8 -
1
9/16
20 15.9 3.03 12.00 1.22 1.46 3.15 3.54 1.69
(M22-M27) (32-41) (7.2) (77) (305) (31) (37) (80) (90) (43)
C
A
D
F
B
H
J
C
A
D
F
B
H
J
Single (NC)
Double (NC-D)
POSITIONING THE CUTTER HEAD
Incorrect Correct
Figure 1