14
© 2017 Energreen Srl
Professional machinery
•
When the machine is being used, be very careful not to let it come into contact with hard
objects such as drain covers, manhole covers, curbs, guard rails, railway tracks etc. This could
cause the tools to break and they could be projected at very high speed.
•
Whenever wire, cables, chains or other objects become caught in the rotor, stop immediately
in order to avoid damage or dangerous situations. Stop the rotation of the cutter, switch off the
engine and remove the key. After having put on work gloves, remove any materials that have
been caught in the rotor with the aid of pliers or shears.
•
Do not continue to use the machine if there vibrations from the flail and/or forestry head that
could cause breakages or serious damage. Ascertain the cause of such problem and eliminate
it.
•
During operation, pay attention to the electrical cables, especially if you need to pass under
them, as you could lose the radio signal. In this case the machine immediately switches off the
engine and stops.
•
Before raising/lowering the equipment with the raiser, make sure nobody is within ten meters
of the machine.
Do no try to free the rotor by making it turn in a counterclockwise direction.
Danger of projection of materials.
DANGER:
If you are using other equipment, refer to the manual of that equipment.
WARNING:
3.2.5 SAFETY REQUIREMENTS FOR THE HYDRAULIC SYSTEM
•
Stop immediately if you notice oil leaks.
•
Periodically check hoses. If they are worn, contact ENERGREEN.
•
Before working on the system lay the head on the ground (or any other mounted equipment)
and turn off the engine.
•
Oils and greases must be disposed of according to anti-pollution standards.
CAUTION:
•
Do not look for oil leakages with your bare hands or other parts of your body. Use paper or
rags to identify the leak.
•
Always wear waterproof gloves and safety goggles.
•
Wait for the oil to cool down before performing any work.
•
Bleed out the oil pressure before disconnecting pipes or during maintenance of the system.
•
High pressure oil could penetrate the skin and cause serious infections. If this happens, see a
physician immediately.
•
These operations must be performed by authorised personnel.
Содержание RoboMAX
Страница 2: ......
Страница 104: ...96 2017 Energreen Srl Professional machinery 12 NOTES...