Part 4 - Configuration
36
Stream
Configure the camera's resolution, encode, compression
method, picture quality, transfer speed, and ips speed
settings.
•
Camera Channels
: It's possible to configure a unique
video profile for each camera.
•
: Apply the video profile settings of the camera
selected under Camera Channel to a different camera.
•
Stream
: Check the current Live video picture quality
and edit remote video profile settings.
-
Encode
: Supports H.264.
-
Resolution
: Select a resolution supported by the
camera. Maximum available resolution is chosen
automatically based on the selected video profile.
-
Quality
: Select
Very High
,
High
,
Standard
, or
B
asic
. You can assign different Quality settings to
different cameras.
-
Bitrate
: Select
CBR
or
VBR
. Transmitted data size
is fixed with
CBR
but varies depending on the
amount of movements in the images with
VBR
.
-
ips
: Select a value. Maximum
ips
is determined
automatically based on the selected video profile.
•
Record Video Profile
: Set up recording quality
profiles.
•
Use Dynamic Remote Stream
: Automatically
transmits the
Stream 1
,
Stream 2
, or
Stream
3
within
the bandwidth of 50 Mbps per a session and 100
Mbps in total, depending on the remote program's
live screen layout.
•
Remote Stream
: Configure the video stream to
monitor from remote locales.
Audio (PLS-53xx)
Configure audio recording settings for all cameras
simultaneously.
•
Audio Codec
: Select an audio codec. (G.711 u-Law or
G.726)
•
Audio In
: Select an audio input source (microphone
or line-in) and then adjust the volume.
•
Audio Out
: Adjust the volume.
Cameras do not feature built-in audio amplifier units
and therefore require the user to purchase a speaker
system with a built-in amplifier separately.