Part 4 - Configuration
23
Storage
Use this option to configure storage settings.
•
Type
: Indicates the type of the installed disk.
•
Capacity
: Indicates the disk's capacity.
•
Format
: If the disk has been formatted, indicates
either
Record
or
Not Using
. If you have connected an
unformatted storage device, the Use As value will be
indicated as
Not Formatted
.
•
Information
: Indicates if the disk is being used for
recording purposes. Disks that were used in different
systems will show up as
Other
. Select
Information
to check the saved data's time information or select
Delete
to erase the data.
•
Auto Format
: If it is enabled, the internal hard disk
drive will be formatted automatically when the
system boots in case that the internal hard disk drive
is not formatted or used for another NVR (except of
the same model).
• Select
Format
to prepare the disk as a storage for
data recording.
• Disks formatted with Use As set to
Not Using
will
not be used for data recording.
• This NVR supports SATA2 HDDs.
Monitoring
Use this option to configure Monitoring settings.
•
Settings
: Configure when and what the system
should monitor for.
•
Actions
: Configure alarm-out (channel) and
notification (email, Callback (LAN 1 through 5) , SNS)
settings.