20
Menu Use
Login with an ID that has permission to access the
Setup menu is needed to access and make changes to
the Setup menu.
Throughout the screens notice the
Default
button
located on the left bottom corner in some of screens.
Selecting
Default
button provides the opportunity to
reset the settings on that screen to its default settings.
Select
Apply
or
OK
button to apply the changes and
exit the screen in any setup. Select
Cancel
button to exit
the screen and no changes are saved.
Certain table-format menus such as the shown in the
Camera Setup on page 35
allow you to change
the title value. In this case, changing the title value
simultaneously changes all other entry values on the
same row.
System Setup
General
This Setup menu contains general system options.
•
Site
: Used to enter a description about the system's
installation site (no description by default).
•
Language
: Choose a language.
•
Clear All Data
: Erases all recording data. Selecting
Clear All Data
displays a confirmation window. Select
Clear
to proceed.
• Before you perform
Clear All Data
, make sure you
are not accidentally deleting important data. Erased
data cannot be recovered.
•
Clear All Data
does not affect the system log.
Instead, the
Clear All Data
event will be added to
the log.
Date/Time
•
Date
: Used to change the system's date setting.
•
Time
: Used to change the system's time setting.
•
Date Format
/
Time Format
: Used to change the
system's date and time formats.
•
Time Zone
: Used to designate the system's time zone.
Refer to the map displayed on the screen and change
the time zone using the mouse.
•
Use Daylight Saving Time
: Enables DST correction.
•
Time Sync.
: Select a time server for the system to
synchronize with.
Part 4 - Configuration