Eneo PNR-5416, Руководство пользователя, Страница: 30 / 49

Part 4 - Configuration
30
a line. You can enter control strings by selecting
and then entering ^, followed by a letter. For example,
Carriage Return is ^M and Line Feed (new line) is ^J.
• Ignore String : Specify a string to ignore from
transaction records.
• Case Sensitive : Ignores case in strings designated
under Transaction Start , Transaction End , Line
Delimiter , and Ignore String .
Case Sensitive
does not apply to control strings.
•
Time Out
: Once
Time Out
has been enabled, the
system will assume the end of a transaction if no new
string is entered within the specified duration of time.
Selecting USB-Serial or LAN as the port activates the
Port Setup button. Select
Setup and configure the Baud
Rate , Data Bit , Stop Bit , and Parity settings.
• If any one of LAN has been selected as the port,
select the Port Setup button and configure the
network port setting.
• If using a USB-serial port, the Text-In feature may
malfunction if the USB cable is removed while the
system is in operation.
• Title : Designate a name for the text-in device.
•
Actions
: Specify which actions to take when text-in is
detected.
-
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
-
Alarm-Out
: Designate event-triggered alarm-out
channels.
-
Notify
: Configure to be notified of events by Mail,
Callback (LAN 1 through 5), SNS.
In order to use the Callback (LAN 1 through 5) feature,
the NVR must be registered on the remote program.
Network Setup
General
•
Remote Audio Channel
: Transmits the selected
network camera's audio to the remote program.
Select
Select From Client
to stream audio of the
channel selected on the remote program.
Audio skipping and sync issues can occur under poor
network conditions.
•
Enable SSL for Transferring Data
: Applies SSL
(Secure Sockets Layer) protection on remote viewing
and recording data transmissions.
• If using the SSL feature, it will not be possible to
connect to the NVR from a remote program that
does not support SSL.
• Changing the SSL setting temporarily severs all
remote connections to the NVR in order to apply the
change.
• This product contains content developed by
OpenSSL Project for use in Open SSL Toolkit (http://
www.openssl.org/).
• WebGuard : If you wish to use WebGuard, select
WebGuard - Use WebGuard Service . Select
WebGuard - WebGuard Port and choose a port
number. For more information on WebGuard, refer to
the
Part 5 - WebGuard on page 38
.
• Network Bandwidth Limit : Configure the bandwidth
to limit.
If you configured the
Network Bandwidth Limit
, the
live video may not be displayed smoothly in a remote
program.