19
Video Recording
Video recording will only take place if all the
connections are made correctly.
Panic Recording
You can control panic recording on/off on the iRAS
program. For more information, refer to the iRAS user's
manual. If the
Panic Recording Duration
option
under
Record Setup > General
has been configured,
Panic Recording will automatically terminate after the
specified duration of time has elapsed.
• Panic Recording takes place irrespective of any
recording schedule set up by the user.
• Panic Recording video profile from
Record Setup >
General
applies to all Panic Recording videos.
Panic Recording will not take place if recording mode
is not set to
Recycle
and the HDD has reached 100%
of its capacity.
Audio Recording
If the Record Audio option under
Record Setup
>
General
has been enabled the camera will record audio
along with video.
Check your local laws and regulations on making
audio recordings.
Video Recording Playback
You can play back video recordings.
1
Check that the NVR was added to a device group in
the
Site
list.
2
Click the
Play
tab on the tab panel
→
Select a NVR
to connect to from the
Site
list, and then drag and
drop it on the Play screen. Recorded video from the
NVR is displayed on the screen.
• Login with an account that has search permission is
needed to playback video recordings.
• The initial video playback point in Search mode is
the recording's last playback point or the end of the
recording data.
• Covert protection on cameras also applies to video
recording playback.
drag and drop