Endress ESE 1308 DBG ES DUPLEX SILENT, Руководство по эксплуатации

Страница: 63 / 88

Special fittings / using accessories
3-way fuel tap / fueling device
Version: May 2011
ESE 808 / 1308 / 1408 DBG ES DU PLEX SILENT 63
Disconnect fueling device from the generator by:
1. Pulling back the knurled sleeve on the quick-action
coupling
( Fig. 5-13-(2))
.
The coupling is released.
2. Pull off quick-action coupling with hose from the
connector.
3. Insert the cover plugs again on the quick-action coupling.
The fuelling device is disconnected from the generator.
Connect the canister to the fueling device as follows:
1. Open sealing cap on the canister.
2. Introduce hose.
3. Engage catch on the fueling device.
The canister is attached.
Change an empty canister during operation as follows:
1. Place the full canister next to the empty canister.
2. Open sealing cap on the full canister.
3. Set the fuel cock to own tank
(Fig. 5-13-(2))
.
The engine is supplied w ith fuel over its own tank.
4. Loosen the fuelling device latch on the canister.
5. Remove hose.
6. Introduce hose into the full canister.
7. Engage catch on the fueling device.
The canister is attached.
8. Set the fuel cock to "external fueling“
(Fig. 5-13-(3))
.
The empty canister is exchanged.
Disconnect fueling device:
Connect up canister
Changing the canister
during operation