Endress+Hauser TopCal S CPC 300, Руководство по эксплуатации

Страница: 20 / 165

4 Wiring TopCal S CPC 300
20 EHauser
4.2 Connection of CPG 300
ƒig. 17: Terminal arrangement CPG 300
Termial Functional assignment Termial Functional assignment
Outputs: External inputs (from Mycom S + PCS)
41/42 Additional valve 1 L+/L– Power supply Mycom S
→
CPG 300
45/46 Additional valve 2 A/B Communication Mycom S
→
CPG 300
47/48 Pump 81/82 ext. Control: cleaning
programme (bin. 0)
binary
coded
(s. p. 74)
51/52 Revolver 83/84 ext. Control: cleaning
programme (bin. 1)
55/56 Control: Assembly in
measurement 85/86 ext. Control: cleaning
programme (bin. 2)
57/58 Control: assembly in
maintenance 87/88 Automatic stop
Internal inputs: 89/90 –
P1/P2 Level check; message that buffer
1 is almost empty 91/92 Control: Assembly in measuring position
P3/P4 Level check; message that buffer
2 is almost empty 93/94 Control: Assembly in maintenance
position
P5/P6 Level check; message that
cleaner is almost empty External outputs (assembly status):
R1/R2 Move pump to end position 61/62 Assembly in measuring position
R3/R4 Move pump one slot
further 65/66 Assembly in maintenance position
71/72 Programme running
75/76 n.c.
"
Caution!
• An external power supply is required for the
following terminals:
61/62, 65/66, 71/72
91/92, 93/94
87/88
81/82, 83/84, 85/86
For these external control inputs you can
use the 15 V auxiliary power supply of the
Mycom transmitter (terminals 85/86 "CPC
supply").
• The power supply (Power: L+/N–) provides
the additional valves and the valve block
(pump drive, revolver drive, assembly
control).
Internal inputs (feedback):
K1/K2 Control: Mechanical NC contact for
service switch
D3/D4 Monitoring:
Has the compressed air failed ?
11/12 Feedback:
Assembly in measuring position
13/14 Fedback:
Assembly in maintenance position
41 +
D1 61
42 –
D2 62
45 B
P1 65
46 A
P2 66
47 81
P3 71
48 82
P4 72
51 83 89
P5 75 11
52 84 90
P6 76
55 85 91
R1 K1 12
56 86 92
R2 K2 13
57 87 93
R3 D3
58 88 94
R4 D4 14
Alive LED