Endress+Hauser RMA42, Руководство по эксплуатации

Страница: 53 / 64

RMA42 Appendix
Hauser 53
11.3 Setup menu
Setup menu
Application 1-channel
2-channel
Diff pressure
Configures the application for the process display unit.
2-channel is the default setting for two-channel devices, 1-channel for single-
channel devices.
AI1 Lower range
Only visible if
É
Diff
pressure is configured as
the application.
Numerical value
1)
0.0000
Configures the measuring range lower limit
AI1 Upper range
Only visible if
É
Diff
pressure is configured as
the application.
Numerical value
1)
100.00
Configures the measuring range upper limit
AI2 Lower range
Only visible if
É
Diff
pressure is configured as
the application.
Numerical value
1)
0.0000
Configures the measuring range lower limit
AI2 Upper range
Only visible if
É
Diff
pressure is configured as
the application.
Numerical value
1)
100.00
Configures the measuring range upper limit
CV factor
Only visible if
É
Diff
pressure is configured as
the application.
Numerical value
1)
1.0
Factor by which the calculated value is multiplied.
CV unit
Only visible if
É
Diff
pressure is configured as
the application.
Customized text, max. 5 digits Unit of the calculated value
CV Bar 0%
Only visible if
É
Diff
pressure is configured as
the application.
Numerical value
1)
0.0000
Configures the 0%-value for the bar graph
CV Bar 100%
Only visible if
É
Diff
pressure is configured as
the application.
Numerical value
1)
100.00
Configures the 100%-value for the bar graph
Linearization
Only visible if
É
Diff
pressure is configured as
the application.
No lin points 2 to 32
2
Number of points needed for linearization.
X-value 1 to X-value 32 Numerical value
1)
0.0000
X-value for the linearization point in question
Y-value 1 to Y-value 32 Numerical value
1)
0.0000
Y-value for the linearization point in question
Analog in 1 Signal type Off
Current
Voltage
RTD
TC
Configures the input type
If "Signal type" is set to "Off", all the parameters under it are hidden.
1) Numerical values consist of 6 digits where the decimal point counts as a digit, e.g. +99.999