Endress+Hauser RMA42, Руководство по эксплуатации

Страница: 17 / 64

RMA42 Operating elements and display
Hauser 17
O
Analog in 1 Analog input 1
Signal type Signal type
Signal range Signal range
Connection Connection type (only for Signal type = RTD)
Lower range Lower limit of measuring range
Upper range Upper limit of measuring range
Tag Designation of analog input
Unit Unit of analog input
Offset Offset of analog input
Ref junction Reference junction (only for Signal type = TC)
Reset min/max Reset min/max value for analog input
O
Analog in 2 Analog input 2
See Analog in 1
O
Calc value 1 Calculated value 1
Calculation Type of calculation
Tag Designation of calculated value
Unit Unit of calculated value
Bar 0% Lower limit for bargraph of calculated value
Bar 100% Upper limit for bargraph of calculated value
Factor Factor for calculated value
Offset Offset for calculated value
No lin points Number of linearization points
X-value X-values for linearization points
Y-value Y-values for linearization points
Reset min/max Reset min/max values
O
Calc value 2 Calculated value 2
See Calc value 1
O
Analog out 1 Analog output 1
Assignment Assignment for analog output
Signal type Signal type of analog output
Lower range Lower range limit of analog output
Upper range Upper range limit of analog output
O
Analog out 2 Analog output 2
See Analog out 1
O
Relay 1 Relay 1
Assignment Assignment of value to be monitored with relay
Function Operating function for relay
Set point Set point for relay
Set point 1/2 Set points 1 and 2 for relay (only, if Function = Inband, Outband)
Time base Time base for gradient evaluation (only, if Function = Gradient)
Hysteresis Hysteresis for relay
O
Relay 2 Relay 2
See Relay 1
Setup menu Description