Endress+Hauser RMA42, Руководство по эксплуатации

Страница: 23 / 64

RMA42 Commissioning
Hauser 23
Limit values and relays are available for monitoring the measured values. They should be configured
as described in Step 5 (
→
Chap. 6.4.5).
Setup
Analog in 1
Analog in 2
Current Voltage RTD (resistance thermometer) TC (thermocouple) Off
Deactivate the
input
Signal range
Signal range (see Technical data); start and end of measuring range defined by type selected
Lower range
Start of measuring range; also enter decimal point
Connection only RTD
Type of connection (2-, 3-, 4-
wire connection)
Upper range
End of measuring range; also enter decimal point
TAG
Channel identifier
Unit
Unit
Offset
Constant value that is added to the current measured value
Ref junction (TC only)
intern / fixed + entering "Fixed
ref junc" value
Res minmax : (yes/no)
Reset minimum/maximum values?