Endress+Hauser Proline Promass E 300 HART, Руководство по эксплуатации

Страница: 155 / 212

Proline Promass E 300 HART Diagnostics and troubleshooting
Hauser 155
Diagnostic
number
Short text Remedy instructions Status
signal
[from the
factory]
Diagnostic
behavior
[from the
factory]
372 Sensor electronic (ISEM)
faulty 1. Restart device
2. Check if failure recurs
3. Replace sensor electronic module
(ISEM)
F Alarm
373 Sensor electronic (ISEM)
faulty 1. Transfer data or reset device
2. Contact service F Alarm
374 Sensor electronic (ISEM)
faulty 1. Restart device
2. Check if failure recurs
3. Replace sensor electronic module
(ISEM)
S Warning
1)
375 I/O- 1 to n
communication failed 1. Restart device
2. Check if failure recurs
3. Replace module rack inclusive
electronic modules
F Alarm
378 Supply voltage ISEM
faulty Check supply voltage to the ISEM F Alarm
382 Data storage 1. Insert T-DAT
2. Replace T-DAT F Alarm
383 Memory content 1. Restart device
2. Delete T-DAT via 'Reset device'
parameter
3. Replace T-DAT
F Alarm
387 HistoROM data faulty Contact service organization F Alarm
Diagnostic of configuration
330 Flash file invalid 1. Update firmware of device
2. Restart device M Warning
331 Firmware update failed 1. Update firmware of device
2. Restart device F Warning
410 Data transfer 1. Check connection
2. Retry data transfer F Alarm
412 Processing download Download active, please wait C Warning
431 Trim 1 to n Carry out trim C Warning
437 Configuration
incompatible 1. Restart device
2. Contact service F Alarm
438 Dataset 1. Check data set file
2. Check device configuration
3. Up- and download new
configuration
M Warning
441 Current output 1 to n 1. Check process
2. Check current output settings S Warning
1)
442 Frequency output 1 to n 1. Check process
2. Check frequency output settings S Warning
1)
443 Pulse output 1 to n 1. Check process
2. Check pulse output settings S Warning
1)
444 Current input 1 to n 1. Check process
2. Check current input settings S Warning
1)
453 Flow override Deactivate flow override C Warning
484 Failure mode simulation Deactivate simulation C Alarm
485 Measured variable
simulation Deactivate simulation C Warning