Endress+Hauser Proline Promag W 400 HART, Руководство по эксплуатации

Страница: 93 / 198

Proline Promag W 400 HART Commissioning
Hauser 93
Configuring the switch output
Navigation
"Setup" menu → Pulse/frequency/switch output 1 to n
‣
Pulse/frequency/switch output 1
to n
Operating mode →  93
Switch output function →  93
Assign diagnostic behavior
→  93
Assign limit →  94
Assign flow direction check →  94
Assign status
→  94
Switch-on value →  94
Switch-off value →  94
Switch-on delay →  94
Switch-off delay →  94
Failure mode →  94
Invert output signal →  94
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Operating mode – Define the output as a pulse,
frequency or switch output. • Pulse
• Frequency
• Switch Pulse
Switch output function In the Operating mode
parameter the Switch option is
selected.
Select function for switch
output. • Off
• On
• Diagnostic
behavior
• Limit
• Flow direction
check
• Status
Off
Assign diagnostic behavior • In the Operating mode
parameter, the Switch
option is selected.
• In the Switch output
function parameter, the
Diagnostic behavior option
is selected.
Select diagnostic behavior for
switch output. • Alarm
• Alarm or warning
• Warning Alarm