Endress+Hauser Proline Promag W 400 HART, Руководство по эксплуатации

Страница: 82 / 198

System integration Proline Promag W 400 HART
82 Hauser
Parameter Description Selection / User entry Factory setting
Burst variable 0 For HART command 9 and 33: select the
HART device variable or the process variable. • Volume flow
• Mass flow
• Corrected volume flow
• Flow velocity
• Conductivity
*
• Corrected conductivity
*
• Electronic temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Density
• HART input
• Percent of range
• Measured current
• Primary variable (PV)
• Secondary variable (SV)
• Tertiary variable (TV)
• Quaternary variable (QV)
• Not used
Volume flow
Burst variable 1 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 2 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 3 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 4 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 5 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 6 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst variable 7 For HART command 9 and 33: select the
HART device variable or the process variable. See the Burst variable 0
parameter.
Not used
Burst trigger mode Select the event that triggers burst message
X. • Continuous
• Window
• Rising
• Falling
• On change Continuous
Burst trigger level Enter the burst trigger value.
Together with the option selected in the
Burst trigger mode parameter the burst
trigger value determines the time of burst
message X.
Signed floating-point number –
Min. update period Enter the minimum time span between two
burst commands of burst message X. Positive integer 1 000 ms
Max. update period Enter the maximum time span between two
burst commands of burst message X. Positive integer 2 000 ms
* Visibility depends on order options or device settings