Endress+Hauser Proline Promag W 400 HART, Руководство по эксплуатации

Страница: 150 / 198

Technical data Proline Promag W 400 HART
150 Hauser
Nominal
diameter
Recommended
flow
Factory settings
min./max. full scale value
(v ~ 0.3/10 m/s)
Full scale value current
output
(v ~ 2.5 m/s)
Pulse value
(~ 2 pulse/s)
Low flow cut off
(v ~ 0.04 m/s)
[in] [mm] [gal/min] [gal/min] [gal] [gal/min]
32 800 2 450 to 80 000 19 500 200 300
36 900 3 100 to 100 000 24 000 225 360
40 1 000 3 800 to 125 000 30 000 250 480
42 – 4 200 to 135 000 33 000 250 600
48 1 200 5 500 to 175 000 42 000 400 600
54 – 9 to 300 Mgal/d 75 Mgal/d 0.0005 Mgal/d 1.3 Mgal/d
– 1 400 10 to 340 Mgal/d 85 Mgal/d 0.0005 Mgal/d 1.3 Mgal/d
60 – 12 to 380 Mgal/d 95 Mgal/d 0.0005 Mgal/d 1.3 Mgal/d
– 1 600 13 to 450 Mgal/d 110 Mgal/d 0.0008 Mgal/d 1.7 Mgal/d
66 – 14 to 500 Mgal/d 120 Mgal/d 0.0008 Mgal/d 2.2 Mgal/d
72 1 800 16 to 570 Mgal/d 140 Mgal/d 0.0008 Mgal/d 2.6 Mgal/d
78 – 18 to 650 Mgal/d 175 Mgal/d 0.0010 Mgal/d 3.0 Mgal/d
– 2 000 20 to 700 Mgal/d 175 Mgal/d 0.0010 Mgal/d 2.9 Mgal/d
1) Order code for "Design", option A "Insertion length short ISO/DVGW until DN400, DN450-2000 1:1" and
order code for "Design", option B "Insertion length long ISO/DVGW until DN400, DN450-2000 1:1.3"
Flow characteristic values in US units
1)
Nominal
diameter
Recommended
flow
Factory settings
min./max. full scale value
(v ~ 0.12/5 m/s)
Full scale value current
output
(v ~ 2.5 m/s)
Pulse value
(~ 4 pulse/s)
Low flow cut off
(v ~ 0.01 m/s)
[in] [mm] [gal/min] [gal/min] [gal] [gal/min]
2 50 4 to 160 75 0.3 0.35
– 65 7 to 260 130 0.5 0.6
3 80 10 to 400 200 0.8 0.8
4 100 16 to 650 300 1.2 1.25
– 125 24 to 1 000 450 1.8 2
6 150 40 to 1 400 600 2.5 3
8 200 60 to 2 500 1 200 5 5
10 250 90 to 3 700 1 500 6 8
12 300 155 to 5 700 2 400 9 12
1) Order code for "Design", option C "Insertion length short ISO/DVGW until DN300, w/o inlet and outlet runs,
constricted meas.tube"
Recommended measuring range
"Flow limit" section →  160
For custody transfer, the applicable approval determines the permitted measuring
range, the pulse value and the low flow cut off.