Endress+Hauser Proline Promag H 100 EtherNet/IP, Краткое руководство по эксплуатации

Страница: 28 / 52

Electrical connection Proline Promag H 100
28 Hauser
7.1.6 Preparing the measuring device
1. Remove dummy plug if present.
2.
NOTICE! Insufficient sealing of the housing! Operational reliability of the measuring
device could be compromised. Use suitable cable glands corresponding to the degree of
protection.
If measuring device is delivered without cable glands:
Provide suitable cable gland for corresponding connecting cable (→  24).
3. If measuring device is delivered with cable glands:
Observe cable specification (→  24).
7.2 Connecting the measuring device
NOTICE
Limitation of electrical safety due to incorrect connection!
‣
For use in potentially explosive atmospheres, observe the information in the device-specific
Ex documentation.
7.2.1 Connecting the transmitter
The connection of the transmitter depends on the following order characteristics:
• Housing version: compact or ultra-compact
• Connection version: device plug or terminals
1 2 1 2 3 4
A B C
A0016924
 9 Device versions and connection versions
A Housing version: compact, aluminum coated
B Housing version: compact hygienic, stainless
1 Cable entry or device plug for signal transmission
2 Cable entry or device plug for supply voltage
C Housing version: ultra-compact hygienic, stainless, M12 device plug
3 Device plug for signal transmission
4 Device plug for supply voltage