Brief operating instructions
Proline Promag 55 PROFIBUS PA
2
Hauser
Brief operating instructions
These brief operating instructions show you how to configure your measuring device quickly and
easily:
Safety instructions
First of all, familiarize yourself with the safety instructions so that you can carry out the following working steps quickly
and easily. Here you can find information about such topics as the designated use of the measuring device, operational
safety and the safety icons and symbols used in the document.
Æ
Installation
The "Installation" section contains all of the necessary information for incoming acceptance, the installation conditions
that have to be observed (orientation, installation site, vibrations etc.), through to the actual installation of the measuring
device, including information about seals, grounding and the required tightening torques for the compact and remote
versions.
Æ
Wiring
The "Wiring" section describes the electrical connection of the measuring device and the connection of the remote
version connecting cable. Additional topics of this chapter include:
• The specifications of the coil/signal cable and the fieldbus cable
• The terminal assignment
• The potential matching and degree of protection
Æ
Display and operating elements
The available display and operating elements of the local display and information on working with the function matrix are
presented here.
Æ
Operating programs
The measuring device can be configured and operated using the local display and using operating programs from various
manufacturers.
Æ
Basic configuration (device parameters, automation functions)
You can commission your measuring device quickly and easily, using the special "Quick Setup" menu. It enables you to
configure important basic functions using the local display, for example display language, measured variables, units of
measures etc.
The following adjustment is to be made separately as necessary:
• Empty/full-pipe adjustment for empty pipe detection
Æ
PROFIBUS interface
Commissioning the PROFIBUS interface.
Æ
System integration and cyclic data transmission
Use of the device master files (GSD files)
Cyclic data transmission
Æ
Hardware settings
Information about setting the hardware write protection, the device address, etc. for:
• PROFIBUS PA
Æ
Application-specific commissioning
Within the "Commissioning" Quick Setup, you have the option of starting the Quick Setup for communication.