Endress+Hauser Liquisys M CCM223, Руководство по эксплуатации

Страница: 35 / 124

Liquisys M CCM223/253 Commissioning
Hauser 35
Factory settings
The first time it is switched on, the device has the factory setting for all functions. The table
below provides an overview of the most important settings.
All other factory settings can be found in the description of the individual function groups in
the "System configuration" section (the factory setting is highlighted in bold ).
* For corresponding version
C07-CLD132xx-13-06-00-xx-005.eps
Fig. 29: Function coding
Selecting and locating functions is facilitated
by a code displayed for each function in a
special display field 
å
28.
The structure of this coding is given in

å
29.
The first column indicates the function
group as a letter (see group designations).
The functions in the individual groups are
counted from the top to the bottom and from
the left to the right.
Function Factory setting
Type of measurement Content of free chlorine or total chlorine in mg/l
Temperature measurement in °C
pH value (EP version)
Sensor setting CCS140 for free chlorine
Alarm contact Steady contact
Alarm delay Setting in minutes
Error current for alarm 22 mA
Check functions* Off; can be switched on one by one as required
Limits 1 and 2 for chlorine / chlorine
dioxide 0.5 mg/l
Limits 1 and 2 for pH* pH 7.2
Limits 1 and 2 for redox* 750 mV
Limits 1 and 2 for temperature 50 °C
Current outputs 1 and 2 4 to 20 mA
Current output 1: measured value for
4 mA signal current 0.00 mg/l
Current output 1: measured value for
20 mA signal current 2.0 mg/l
Current output 2: temperature value for
4 mA signal current
0 °C
Current output 2: temperature value for
20 mA signal current 50 °C
C C1 C111
C121
C131 C132 C133