Endress+Hauser Levelflex M FMP40, Руководство по эксплуатации

Страница: 54 / 92

Commissioning Levelflex M FMP40 with HART/4...20 mA
54 Hauser
6.5 Envelope curve with VU331
After the basic setup, an evaluation of the measurement with the aid of the envelope curve
("
Envelope Curve " (0E) function group) is recommended.
6.5.1 Function "Plot Settings" (0E1)
Here you can select which information is shown on the display:
•
Envelope Curve
• Substracted Signal
• Mapping
6.5.2 Function "Recording Curve" (0E2)
This function determines whether the envelope curve is read as
•
Single Curve or
• Cyclic
!
Note!
If the cyclic envelope curve mode is active on the display, the measured values are updated in a
slower cycle time. Thus, it is advisable to leave the envelope curve mode after the measuring point
has been optimized.
⇒
E HAUSER
E
+ –
⇒
E HAUSER
E
+ –