Endress+Hauser FMB70, Руководство по эксплуатации

Страница: 4 / 20

Basic safety instructions Deltapilot S FMB70
4 Hauser
Visual inspection
Notice or individual step to be observed
1, 2, 3, ...
Item numbers
A, B, C, ...
Views
2.3 Registered trademarks
KALREZ®
Trademark of E.I. Du Pont de Nemours & Co., Wilmington, USA
TRI-CLAMP®
Trademark of Ladish & Co., Inc., Kenosha, USA
HART®
Registered trademark of the FieldComm Group, Austin, USA
GORE-TEX®
Trademark of W.L. Gore & Associates, Inc., USA
3 Basic safety instructions
3.1 Requirements for the personnel
Personnel must meet the following requirements for their tasks:
‣
Trained, qualified specialists must be suitably qualified to perform this function and task
‣
Are authorized by the plant owner/operator
‣
Are familiar with federal/national regulations
‣
Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the application)
‣
Follow instructions and comply with basic conditions
3.2 Intended use
The Deltapilot S is a hydrostatic pressure sensor for measuring level and pressure.
3.2.1 Foreseeable incorrect use
The manufacturer is not liable for damage caused by improper or non-intended use.
Verification for borderline cases:
‣
For special fluids and fluids for cleaning, Hauser is glad to provide assistance in
verifying the corrosion resistance of fluid-wetted materials, but does not accept any
warranty or liability.