Endress+Hauser Flowfit CYA27, Руководство по эксплуатации

Страница: 5 / 52

Flowfit CYA27 Basic safety instructions
Hauser 5
2 Basic safety instructions
2.1 Requirements for personnel
• Installation, commissioning, operation and maintenance of the measuring system may
be carried out only by specially trained technical personnel.
• The technical personnel must be authorized by the plant operator to carry out the
specified activities.
• The electrical connection may be performed only by an electrical technician.
• The technical personnel must have read and understood these Operating Instructions
and must follow the instructions contained therein.
• Faults at the measuring point may only be rectified by authorized and specially trained
personnel.
Repairs not described in the Operating Instructions provided must be carried out only
directly at the manufacturer's site or by the service organization.
2.2 Designated use
The assembly is specially designed to hold sensors. This includes in particular membrane-
covered disinfection sensors, e.g. Memosens CCS51D and 12 mm sensors with Pg 13.5
thread adapters and 120 mm installation length, such as pH or ORP sensors, oxygen
sensors and conductivity sensors. Thanks to its design, it can be operated in pressurized
systems.
Use of the device for any purpose other than that described, poses a threat to the safety of
people and of the entire measuring system and is therefore not permitted.
The manufacturer is not liable for damage caused by improper or non-designated use.
2.3 Workplace safety
As the user, you are responsible for complying with the following safety conditions:
• Installation guidelines
• Local standards and regulations