Endress+Hauser Flowfit CYA27, Руководство по эксплуатации

Страница: 31 / 52

Flowfit CYA27 Operation
Hauser 31
To avoid this, the sensor values at the transmitter can be set to HOLD for the duration of
sampling. In this case, sampling is performed as follows:
1. Set the sensor measured values on the transmitter to HOLD .
 Follow the Operating Instructions for the transmitter.
2. Carefully open the sampling valve and rinse for a few seconds.
 Collect this quantity of liquid in a suitable vessel and discard.
3. Take a sample in a suitable vessel.
4. Close the sampling valve securely.
5. Cancel the
HOLD status of the sensor measured values on the transmitter.
6. Check the flow setting/function of the assembly and readjust if necessary.