Ecograph T, RSG35
Operation
Hauser
49
10.15 Limit values
It is possible to change the limit values during operation in the main menu under
"Operation -> Limits"
.
This function must be enabled beforehand in the main menu under
"Expert ->
Application -> Limits-> Change set points: Outside of setup also"
.
Detailed description of the limit values: → 148
10.16 WebDAV Client
The function of the WebDAV client is to transmit recorded data automatically to a
connected WebDAV server (e.g. NAS drive). The recorded data are sent to the connected
WebDAV server cyclically every 15 minutes. The generated files correspond to the files
that are automatically saved to the SD card.
The client is configured via
"Setup -> Advanced setup -> Application -> WebDAV
Client"
. The settings under
"Setup -> Advanced setup -> System -> External memory"
are also used for this, with the exception of the SD card settings (memory build-up,
warning, and relay). The memory is regarded as a stack memory.
Detailed description of the parameters: → 164
Note: With the WebDAV client, the data are transmitted to the WebDAV server in
accordance with the selection made in the .CSV or "protected format".
10.16.1 Access to the WebDAV server via HTTP (HTML)
Address entry in browser:
http://<ip-address>/webdav
The data are updated cyclically every 15 minutes. The data are automatically updated each
time a user logs in.
Note: Leading zeros in IP addresses must not be entered (e.g. enter 192.168.1.11
instead of 192.168.001.011).
Administrator or service authentication is required. ID and password administration is
performed in the main menu under
"Setup -> Advanced setup -> Communication ->
Ethernet -> Configuration Web server -> Authentication"
.
Default value for ID: admin; Password: admin
Note: The password should be changed during commissioning!
Note: For devices with a stainless steel front and touchscreen, the data are always
made available in "protected format" via the WebDAV server.
