CleanFit P CPA 471
1 Safety
Hauser
3
1.4
Operational safety
The assembly CPA 471 has been designed for safety according to the state of the art
and in compliance with the applicable regulations and EC directives (see Technical
Data).
However, if it is used improperly or other than for its intended purpose, it may pose a
hazard, e.g. through incorrect installation or the wrong operating conditions.
#
Warning!
•
If the device is used for any application other than those described in this manual, it
may lead to unsafe and improper functioning of the measuring system and is therefore
not permitted.
•
Make sure you strictly adhere to the warnings and notes in these Operating
Instructions.
Instructions for installation in pressurised systems
#
Warning!
•
Do not exceed the maximum assembly operating pressure.
•
Depressurise the system before installing or removing the assembly.
•
Inspect screw unions, valves and pipes for leaks or damage on a regular basis.
1.5
Return
If the assembly has to be repaired, please return it
cleaned
to the Hauser
sales centre responsible. Please use the original packaging.
