CleanFit P CPA 471
4 Operation
Hauser
17
4
Operation
The assembly stop bolt lock arrests the lifting tube. Its operation is described in the two
figures below:
Fig. 4.1:
Release stop bolt lock:
Remove stop bolt and turn through 90° so that the plastic grooves rest on the metal edge.
Fig. 4.2:
Arrest stop bolt lock:
left:
Turn stop bolt lock through 90° so that the plastic grooves are located above the recesses
right:
When you turn the lifting tube clockwise, the stop bolt lock engages.
4.1
Starting up the assembly
!
Note!
Before the first start-up, make sure of the following points:
•
All seats are correctly seated (on the assembly and process connection)
•
Electrode is correctly installed and connected
•
Water supply line is correctly connected to the rinse fittings (if fitted)
•
Limit switches (depending on equipment fitted) are correctly connected
Warning!
Before applying compressed air to the pneumatic assembly, make sure the
connection is correctly fitted!
