CE 4
Safety instructions
Hauser
5
1.4
Returns
Before units are returned to Hauser for repair, the following must be taken care
of:
•
The unit should always be accompanied by a completed ’Safety Regulation Form’.
Only then can Hauser transport, check and repair the returned unit.
•
If required place a special handling recommendation form with the returned unit, e.g.
a safety data note to EN 91/155/EWG.
•
Remove all materials soiling the unit. Please take special note of the gasket cut-outs
and rims into which solids can seep. This is especially important if the medium
measured could constitute a health hazard, e.g. flammable, poisonous, corrosive,
carcinogenic, etc.
!
Note!
A
copyable sample
of the ’Safety Regulation Form’ can be found at the end of these
instructions.
"
Caution!
•
Do not return a unit if it is deemed impossible to remove all hazardous materials, e.g.
material seepage in scratches or media diffused by the plastic.
•
Costs incurred for disposal due to lack of cleaning of the unit or for personal injury
(corrosion burns etc.) will be invoiced to the user.
It is always recommended to protect the unit correctly when returning it e.g. in case of
repairs. Optimum protection is given by the original packaging. Repairs must only be
carried out by the Hauser service personnel. For the nearest service
department, see the addresses at the rear of this manual.
!
Note!
When returning the unit for repair please enclose a note detailing the fault and the
application.
1.5
Safety pictograms and symbols
The safety hints in these operating instructions are indicated by the following symbols:
"
Caution!
This symbol means activities or sequences that, if done incorrectly, could lead to faulty
operation or destruction of the unit.
#
Warning!
This symbol means activities or sequences that, if done incorrectly, could lead to
serious personal injury, to a safety risk or destruction of the unit.
!
Note!
This symbol means activities or sequences that, if done incorrectly, could have an
indirect influence on the unit’s operation or could cause an unforeseen unit reaction.
