Endress+Hauser CE 4, Руководство по эксплуатации

Страница: 24 / 36

Maintenance and cleaning CE 4
24 Hauser
1. Select the option 'Set Param' in the set-up menu: Keys
V
or
W
2. Operate the ’OK’ key. LOGO! displays the first paramete.
Pos. A: Block number
Pos. B: Display number on functions when using more than one display (not
relevant here)
Pos. C: The preset value of the parameter T (time)
Pos. D: Actual value
’ESC’ leads to a return to the set-up menu without changes.
3. Select the required parameter: Keys
V
or
W
.
4. If a parameter is to be changed then select that parameter and operate the ’ OK ’
key.
5. Using the keys
U
or
T
´the cursor can be moved to the point in the parameter that
is to be changed. Using the keys
V
or
W
the value can be changed.
6. Accept the new set-up using the ’ OK ’ key.
7. Return to ’Continuous operation’ by operating the ’ ESC ’ key twice.
LOGO! switch to RUN
LOGO! can be switched to RUN using the main menu.
1. Return to main menu: ’ ESC ’ key
2. Move ’ > ’ to ’ Start ’: Keys
V
or
W
3. Accept ’Start’: ’ OK ’ key
Function Set up position Time interval Factory default
Start hose rinse B01 (0...99h) 24h
Hose rinse time B02 (0...99s) 45s
Pump rinse time B03 (0...99s) 30s
Start sensor rinse B04 (0...99h) 18h
Post rinse B05 (0...99s) 10s
Clean (detergent) B06 (0...99s) 30s
Pre-rinse B07 (0...99s) 10s
Hold time after suction hose rinse B08 (0...99s) 20s
Pump status
Hold (transmitter)
Stop
>Set Param
Set Clock
Prg Name
B1 1
T =60:00s
Ta =06:00s
B
C
D
A