CE 4
Maintenance and cleaning
Hauser
23
Controller set-up menu
The LOGO controller recognises 2 operating modes: STOP and RUN.
How to stop the programme
In order to stop the programme continue as shown:
Fig. 20:
...Operate ’ESC’, in order to move within the set-up menu
LOGO! changes the operating mode Set Parameters and displays the set-up menu:
Fig. 21:
set-up menu
Using this menu point the programme can be stopped and then changed into the
operating mode set in the main menu. Follow these steps:
1.
Move the ’
>
’ to ’
Stop
’: Keys
V
or
W
2.
Accept ’
Stop
’: Key’
OK
’
3.
Move the ’
>
’ to ’Yes’: Keys
V
or
W
4.
Accept ’
Yes
’: Key ’
OK
’
Change to the set-up operating mode
In order to change a specific parameter continue as follows:
In order to change from ’Continuous operation’ of the controller into the operating mode
’Set’, operate the ’
ESC
’ key.
Mo 09:30
06.21.01
Stop
>Set Param
Set Clock
Prg Name
Stop Prg
>No
Yes
