Endress+Hauser ASP Inline, Руководство по эксплуатации

Страница: 47 / 80

ASP Inline Technical data
Hauser 47
For a return, e.g. in case of repair, the device must be sent in protective packaging. The original
packaging offers the best protection for this. Repairs must only be carried out by your supplier's
service organisation.
!
Note!
Please enclose a note describing the fault and the application when sending the assembly in for
repair.
9.6 Disposal
The device contains electronic components and must, therefore, be disposed of as electronic waste
in the event of disposal. Please observe in particular the local waste disposal regulations of your
country.
10 Technical data
10.0.1 Inputs
1 control input
Valve "rinse water" (optional)
Valve "compressed air" (optional)
10.0.2 Outputs
1 signal output "cylinder up"
1 signal output "cylinder down"
10.0.3 Power supply
Electrical connection (circuit
diagram) For circuit diagrams, see chapter 4, ’Wiring’
Supply voltage 24 VDC
Cable entry 1 cable gland, M16 x 1.5
Cable specifications 6 x AWG 24
UL-Style 2464 / 1061 (weather-proof, UV-resistant)
Power consumption max. 1.8 W
Pneumatic connection The ASP Inline sampler assembly can either be driven pneumatically or by an electric motor
(optional).
See also chapter 3.3.3, ’Pneumatic connection’
10.0.4 Operating conditions
The operating conditions for the assembly can be found in chapter 3.2, ’Installation conditions’.
10.0.5 Environment
Ambient temperature range 0 to +40 °C