Endress+Hauser ASP Inline, Руководство по эксплуатации

Страница: 33 / 80

ASP Inline Identification
Hauser 33
2 Identification
2.1 Device designation
2.1.1 Nameplate
Compare the nameplate on the assembly with the following diagram:
Fig. 1: ASP Inline nameplate (example)
Item 1: order code and serial number of the assembly
Item 2: supply voltage
Item 3: power consumption (solenoid valve)
Item 4: operating pressure for pneumatic cylinder
Item 5: process pressure range
2.2 Scope of delivery
The assembly's scope of delivery consists of:
• ASP Inline sample assembly (RPM20)
• Operating Instructions (BA149r09a3)
!
Note!
See chapter 8 "Accessories" for accessories for the assembly
2.3 Certificates and approvals
The assembly has been constructed and tested to state-of-the-art operational safety standards and
left the factory in perfect condition as regards technical safety. The device meets the relevant
standards and directives as per EN 61 010 "Safety requirements for electrical equipment for
measurement, control and laboratory use".