Endress+Hauser ASP Inline, Руководство по эксплуатации

Страница: 35 / 80

ASP Inline Installation
Hauser 35
3.1.3 Orientation
Fig. 3: Installation position of the ASP Inline assembly
3.2 Installation instructions
3.2.1 Mounting kit
• Mounting wrench AF 24 mm, e.g. open-end wrench
• Size 4 screwdriver
3.2.2 Device installation
"
Caution!
• Ensure that the pipe from which the sample is being taken is not under pressure when installing
the assembly and does not contain any medium nor is medium being supplied to it.
• When installing or removing the assembly, ensure that it is disconnected from the power supply
and the compressed air supply.
Fig. 4: Mounting the ASP Inline assembly at the sampling position
Item A:gasket
Item B:4 screws, M16
Item C:washers
Item D:nuts
60°
30°
5 ml version
Pressurised
pipe
Pressurised
pipe
50 ml version