Enconnex AC6000, Руководство пользователя

Страница: 19 / 48

Figure 4.4-4: Slide Rail Mounting.
Step 1: Remove the slide rail assembly from it’s packing materials.
Step 2: Remove the inner rails and extract them from the outer rail channels
Step 3: Fasten the inner rails to the AC6000 enclosure.
4.4.2 Installing the Outer Slide Rails
Materials Needed:
●
#12-24 x ⅝ ” Pilot Point Machine Screw
(qty. 8)
●
Cage Nuts (qty. 12)
●
Outer Slide Rails (qty. 1 set)
Figure 4.4-5: Outer slide rails
Tools Required:
●
Phillips Head Screwdriver
●
Cage Nut Compressor Tool
Step 1:
Select installation height on the rack posts where you will mount left and right
outer slide rails.
Step 2: Install 4 cage nuts in each front rail, and 2 cage nuts in each back rail as shown in the
picture.