Enconnex AC6000, Руководство пользователя

Страница: 31 / 48

Step 1: Set the SNMPv3 Admin Username and Password by issuing a SET command to OID
.1.3.6.1.4.1.52251.2.1.1.4.5 for Username and .1.3.6.1.4.1.52251.2.1.1.4.6 for Password. These
credentials will allow a user to read and write any SNMP field.
Step 2: Set the SNMPv3 Read-Only Username and Password by issuing a SET command to
OID .1.3.6.1.4.1.52251.2.1.1.4.3 for Username and .1.3.6.1.4.1.52251.2.1.1.4.4 for Password.
These credentials will allow a user to have read-access to SNMP fields.
Step 3: Set the SNMPv3 authentication protocol by issuing a SET command to OID
.1.3.6.1.4.1.52251.2.1.1.4.1 and the desired authentication protocol: MD5 (1) (default) or SHA
(2).
Step 4: Only the Admin or Read-Only user may be configured to receive traps when configured
to SNMPv3. If the Admin user is the intended trap receiver:
i. Set the Admin Message Process Model OID .1.3.6.1.4.1.52251.2.1.1.4.10 to 3.
ii. Set the Admin Security Model OID .1.3.6.1.4.1.52251.2.1.1.4.12 to 3.
iii. Set the Read-Only Message Process Model OID .1.3.6.1.4.1.52251.2.1.1.4.9 to 0 (for v1) or 1
(for v2).
iv. Set the Read-Only Security Model OID .1.3.6.1.4.1.52251.2.1.1.4.11 to 1 (for v1) or 2 (for v2).
If the Read-Only user is the intended trap receiver:
i. Set the Read-Only Message Process Model OID .1.3.6.1.4.1.52251.2.1.1.4.9 to 3.
ii. Set the Read-Only Security Model OID .1.3.6.1.4.1.52251.2.1.1.4.11 to 3.
iii. Set the Admin Message Process Model OID .1.3.6.1.4.1.52251.2.1.1.4.10 to 0 (for v1) or 1
(for v2).
iv. Set the Admin Security Model OID .1.3.6.1.4.1.52251.2.1.1.4.12 to 0 (for v1) or 1 (for v2).
Up to 4 trap receivers can be configured. For IPv4, the trap table is at OID
.1.3.6.1.4.1.52251.2.1.1.2.10. For IPv6, the trap table is at .1.3.6.1.4.1.52251.2.1.1.3.10.
Step 1: For receiver 0, set the receiver’s IP address at TRAP_TABLE.1.3.0.
Step 2: Set the receivers community access (public or private) at TRAP_TABLE.1.4.0
Step 3: Enable the receiver by setting the enabled field at TRAP_TABLE.1.2.0 to 1.
For additional configuration, please see the
AC6000 MIB file .
6. AC6000 Display
6.1 LCD Display Icons
The AC6000 front panel displays system information about its operational state (see Table
6.1-1 for more detail)
6.2
Default Screen