Enconnex AC6000 страница 8 Скачать руководство пользователя | Manualshive

Страница: 8 / 48

background image

- CAUTION

●

Install this UPS in a clean, temperature- and humidity-controlled indoor location in
order to reduce the risk of fire or electric shock. Ambient temperature must not be
above 40°C (104°F) or below 0°C (32°F). Do not locate near water or excessive
humidity (95% maximum).

●

It is advisable to not bring superfluous conductors into the installation area. Before
beginning maintenance or installation, please remove jewelry (e.g. watches, rings and
necklaces). Metal conductors have the potential to short between power terminals
(power and ground, commonly) and nearly instantly heat to very high temperatures
when connected between them. This can cause serious burns and/or weld a metal
object to the terminals.

●

This system is cooled through forced air convection. Do not block air flow of fans and
allow adequate space on the front and rear of the unit for proper ventilation.

●

This equipment has been tested and found to comply with the limits for a Class-A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
that the user must correct, including the expense of all corrective modifications.

●

This system is suitable for IT (impedance-grounded) systems.

1.2

Disclaimers

Modification or changes to the AC6000 not performed or expressly approved by
Enconnex may void the unit's warranty.

The integral battery is not field-replaceable. There are no user-replaceable fuses within.
Contact Enconnex Customer Support for assistance.

The AC6000 is designed for installation in temperature-controlled, indoor areas free of
conductive contaminants. See Technical Specifications for more information.

1.3

Life Support Applications

The Enconnex AC6000 is not for use in life support applications where failure or
malfunctions of the unit can be reasonably expected to cause failure of the life support

«
...
6
7
8
9
10
...
»

Содержание AC6000

















































Отзывы:

Нет отзывов

Похожие инструкции для AC6000

Бренд: Unitek Страницы: 28

Бренд: JUISE GOOSE Страницы: 8

Бренд: GE Consumer & Industrial Страницы: 60

SBP Plus Series

Бренд: SmartPower Страницы: 15

VFI 10000 CT LCD

Бренд: PowerWalker Страницы: 81

Бренд: PowerWalker Страницы: 70

Бренд: CPS Страницы: 2

Бренд: Sola Страницы: 30

Бренд: Smartbitt Страницы: 22

Бренд: Smartbitt Страницы: 57

Бренд: LESTAR Страницы: 2

Бренд: sais Страницы: 11

Бренд: lapara Страницы: 31

Бренд: Eaton Страницы: 46

Бренд: Santak Страницы: 13

Бренд: Santak Страницы: 47

Бренд: Wartsila Страницы: 14

JOVYATLAS POWERMASTER S 6000

Бренд: WÄRTSILÄ Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды