ENC EDS300 Series, Руководство пользователя

Страница: 22 / 57

Function parameter schedule graph
18
4 Function parameter schedule graph
4.1 Symbol description
× ----
Parameter can’t be changed in process of running
○ ----
Parameter can be changed in process of running
* ----
Read-only parameter, unmodifiable
4.2 Function parameter schedule graph
F0 － Basic run function parameter group
Function
code
Name Set range Unit
Factory
default
Modifi
-cation
F0.00 Frequency input
channel selection
0: Keypad analog potentiometer setting
1: Keypad digital setting
2: Terminal UP/DOWN adjust setting (stored
after power off)
3: Serial port setting
4: Reserved
5: CCI analog setting (CCI-GND)
6: Reserved
7: Reserved
8: Combination setting
9: Terminal UP/DOWN adjust setting (not stored
after power off)
10: Provision series port (stored after power off )
11: Remain
1 1 ○
F0.01 Frequency digit setting Lower limit frequency ～ upper limit frequency 0.01Hz 50.00Hz ○
F0.02 Run command channel
selection
0: Keyboard run control
1: Terminal run command control (Keyboard
STOP command ineffective)
2: Terminal run command control(Keyboard
STOP command effective)
3: Serial port run command control(Keyboard
STOP command ineffective)
4: Serial port run command control(Keyboard
STOP command effective) 1 0 ○
F0.03 Run direction setting LED Units digit: 0: Forward run
1: Reverse run
LED Tens digit: 0: Reverse run allowed
1: Reverse run banned
LED Hundreds digit: REV/JOG key selection
0: As reverse run key
1: Reverse run banned
1 100 ○
F0.04 Acce/Dece mode
selection
0: Linear accelerating decelerating mode
1: S curve accelerating decelerating mode 1 0 ×
F0.05 S curve start section
time
10.0
（
%
）～
50.0
（
%
） （
Acce/Dece time
）
F0.05+F0.06 ≤ 90
（％）
0.1(%) 20.0(%) ○
F0.06 S curve risetime 10.0 （ % ）～ 70.0 （ % ） （ Acce/Dece time ）
F0.05+F0.06 ≤ 90
（
%
）
0.1(%) 60.0(%) ○
ENC