AMETEK CTS
VDS 200Q10 Series
Manual for Operation
V 1.00
21 / 35
3.4. Service
All service functions are indicated on the display.
SERVICE
F1 : Addresses
F2 : Selftest
F3 : Setup
F5 : Set Voltage
F6 : Source Setting
F1
F2
F3
F4
F5
F6
F7
Addresses
The addresses of the AMETEK CTS GmbH and the
AMETEK CTS GmbH in Germany are shown.
The addresses of all AMETEK CTS sales agencies
are listed on the web site of EM TEST under:
Selftest
The operator can initialize a self test procedure to check the operation of the instrument. The software will clearly
explain the selftest procedure.
Set-up
The operator can change the simulator setting as explained on the next chapter.
Source Settings
The source settings menu contains features that are specific to the VDS 200Q10 series as explained in the next
chapter.
Set voltage
Power On setting of the following parameters:
F1: Vn Nominal supply voltage for the DUT. By selecting
Vn
in all voltage settings, the voltage in this Set
voltage menu will be taken.
F2: I
Maximal current setting for the VDS 200Q10.x after power ON.
