24032-2-1008
Page 39
Specifications
Model
DVP30C(A,B)30(B,F,S,W)
LP
NAT
Input
BTU/HR (KW/H) Maximum
30,000 (9.3)
32,000 (9.3)
BTU/HR (KW/H) Minimum
22,000 (5.9)
22,400 (6.5)
Height
27 3/4” (705 mm)
Width
28 1/16" (713 mm)
Depth
17 3/8" (442 mm)
Gas Inlet (Pipe)
1/2" (13 mm)
Web Site: www.empirecomfort.com
The Heritage Cast Iron Stoves
Models:
DVP30CA30B, DVP30CA30F, DVP30CA30S, DVP30CA30W
DVP30CB30B, DVP30CB30F, DVP30CB30S, DVP30CB30W
Empire Comfort Systems
918 Freeburg Avenue
Belleville, Illinois 62220-2623
GAS-FIRED
CLEARANCES
In selecting a location for installation, it is necessary to provide adequate accessibility clearances for servicing and proper opera-
tion.
Locating and Venting the Direct Vent Fireplace
Clearances: When facing the front of the direct vent fireplace the minimum clearances to combustible construction (material) are
the following:
Top of appliance (ceiling)
36 (inches)
Heater Corners (45° angle) to Wall 4 (inches)
Rear Wall
1 (inches)
Floor
0 (inches)
Side Wall
6 (inches)
Installation on Rugs and Tile
This appliance must be installed on a flat, solid, continuous surface (e.g. wood, metal, concrete). This may be the floor, or it may
be raised up on a platform to enhance its visual impact. The appliance may be installed on carpeting, tile, wood flooring or other
combustible material as the appliance's base extends the width and depth of the appliance.
6” (153mm)
TO SIDE WALL
6” (153mm) TO
COMBUSTIBLE
MATERIAL
36” (915mm) TO CEILING OR
HORIZONTAL PROJECTION
ABOVE APPLIANCE
4” (102mm) HEATER CORNERS TO SIDE WALL
10”
(254mm)
10
”
(254mm)
4”
(102mm)
NOTE: HEATER INSTALLED AT 45° ANGLE IN CORNER
1” (25.4mm)
TO COMBUSTIBLE MATERIAL
EMPIRE
EMPIRE
Comfort Systems