12
3) Clip the PAC-3P’s earth clamp to the earthed metal pin on the top of the Lead Test
Adaptor plug being used.
4) Switch the PAC-3P ON.
NOTE: LCD screen will light up.
5) Press the “SELECT” button until “GO: LEAD TEST” is selected on screen.
6) Press “GO” to proceed.
7) Press “GO” and the tester will conduct the Earth Continuity test.
8) Press “SELECT” – If Rpe = PASS it will continue to the next stage of testing.
If Rpe = FAIL the PAC-3P will exit the testing procedure.
NOTE: If the Rpe has failed please check and verify your earth clamp connection