EMKO EAOM-210 FLJ Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 132

EMKO EAOM-210 FLJ Скачать руководство пользователя страница 109

EAOM-210 FLJ.eng / ver 0.0

Pages 109 / 132

4.2 Auto Operation

1. Check that the mains is connected to the unit and is present.

2. Check the mains voltage readings on the display.

3. At the EAOM-210 FLJ, press the

Auto

(27)

button. The LED (10) on the button should

light.

4. Switch off the mains supply to the unit. Check that the generator starts and, after a
delay, the load is transferred to the generator.

5. Restore the mains supply to the unit. Check that, after a delay, the load is transferred
back to the mains and the generator, after a further delay, shuts down.

4.3 Test Mode Operation

1. Check that the mains is connected to the unit.

2. Press the

Test

(28)

button. At this moment the LED (11) will light on.

3. Check that the generator starts and that the load is still connected to the mains.

4. Switch off the mains supply. Check that the contactors change over to connect the load
to the generator. Check also that the

Auto

(10)

LED is lit. The unit changes operating mode

to AUTO Mode automatically.

5. Restore the mains supply. Check that the contactors reconnect the load to the mains
supply.

6. Check that the generator shuts down with cool-down period.

«
...
107
108
109
110
111
...
»

Содержание EAOM-210 FLJ





































































































































Отзывы:

Нет отзывов