ENVIROMASTER INTERNATIONAL LLC
12
SETTING UP THE BUILT-IN
TIME CLOCK
HOW TO SET THE PRESENT TIME
1. Press CLK/Timer: “Clock Set” highlights.
NOTE: Display will stop flashing after 15 seconds.
2. Select Hour with either (+) or (-). figure will flash.
3. Press (+) or (-) to change hour.
4. Press CLK/Timer to confirm and advance.
5. Repeat steps 3 and 4 for minutes and day of week.
6. Press CLK/Timer to confirm.
HOW TO SET COOL, HEAT, OR AUTO MODE
1. Press Mode button until desired mode is highlighted.
2. Select temperature with Temp +/- buttons (range
58°F to 90°F).
3. Select desired fan speed with Fan button.
4. Press the On/Send to switch unit on and transmit
system settings.
HOW TO SET DRY MODE
Repeat Steps 1, 2, and 4.
NOTE:
During the dry mode the system operates in
cooling only mode and the indoor fan is fixed at low
speed.
HOW TO SET FAN ONLY MODE
Repeat Steps 1, 2, and 4.
NOTE:
During the fan only mode only the indoor fan
will operate, cooling and heating will be disabled.
HOW TO SET THE WEEKLY PROGRAM
(Monday - Friday)
1. Press CLK/Timer: twice "Program" highlights.
NOTE:
Display will stop flashing after 15 seconds.
2. Select Program 1 by pressing (+) or (-). “Program
1” and “Start Time will flash.
3. Press (+) or (-) to select and change hours.
4. Press CLK/Timer to move to minutes.
5. Repeat steps 3 and 4. “Stop Time” will flash.
6. Repeat steps 3, 4, and 5. “Program 2” and “Start
Time” will flash.
7. Repeat steps 3, 4, and 5. “Send” will flash.
8. Press On/Send to switch unit on and transmit sys-
tem settings.
NOTE:
A small clock symbol will appear in the trans-
mitter display and the red LED indicator on the fascia
display panel will illuminate to indicate the weekly pro-
gram is in operation.
HOW TO SET THE WEEKLY PROGRAM (Saturday)
1. Press CLK/Timer three times. “Program” and “SA”
highlight.
NOTE:
Display will stop flashing after 15 seconds.
2. Repeat as per Monday - Friday (above).
HOW TO SET THE WEEKLY PROGRAM (Sunday)
1. Press CLK/Timer four times. “Program” and “SU”
highlight.
NOTE:
display will stop flashing after 15 seconds.
2. Repeat as per Monday - Friday (above).
I
MPORTANT: The built-intime clock provides ON/
OFF functionality. The time clock does not pro-
vide occupied/unoccupied time control. Refer to
the separate Infrared Controller manual for fur-
ther details.
