ENVIROMASTER INTERNATIONAL LLC
11
DISPLAY INDICATORS
TRANSMIT INDICATOR
Flashes when system
settings are transmitted.
MODE INDICATOR
Highlights Mode of Operation.
FAN MODE INDICATOR
Highlights Fan Speed.
CLOCK/TIMER DISPLAY
Shows current day, time,
or weekly program Stop/Start times.
SETPOINT DISPLAY
Indicated temperature setpoint.
SWING INDICATOR
Indicates operation of the
motorized air vanes (where fitted).
SLEEP INDICATOR
Indicates when
Sleep mode is selected.
SELECTOR BUTTONS
MODE OF OPERATION
Selects the mode options: Heat, Cool, Auto Heat/
Cool, Dry Coooling, and Fan Only.
FAN
Selects fan speed options: Low, Medium, High,
and Auto.
CLK/TIMER +/-
Selects and adjusts the clock or weekly pro-
gram Stop/Start times.
TEMP +/-
Adjusts temperature setpoint in intervals of 1ºF
beftween 58 - 90ºF.
SLEEP
Selects/Deselects sleep mode. Using the On/
Send button, the temperature setpoint will set
back 2ºF after 1 hour, 4ºF after 2 hours.
SWING
Causes the motorized air vanes to oscillate
when selected (not applicable to all models).
OFF
Switches the unit off (in certain instances the
fan may be subject to a 2 minute run on time to
dissipate residual heat).
ON/SEND
Press this button to switch the unit on and transmit
the system settings. The unit will confirm receipt of
the adjustment by producing a short audible tone.
STANDARD HAND HELD TRANSMITTER:
Small, light and practically de-
signed, the hand held transmitter takes 2 AAA batteries that can be easily
fitted by removing the sliding lid on the underside of the transmitter. Please
pay attention to the polarity and correct orientation of the batteries during
fitting.
When using the infrared handheld transmitter, always point the transmitter
head directly at the receiver. Use the On/Send button to transmit settings to
the microprocessor. At the time of transmission the symbol will display
and an audible buzzer will sound if the signal has been correctly received.
After changing any of the settings in the transmitter’s LCD display, the new
settings must be transmitted to the unit using the On/Send button before the
changes will take effect.
THE INFRARED TRANSMITTER
