2 • RLDS I&O Manual
026-1309 Rev 11
1.3.6. Misuse and Modifications to
the Instrument
The protection provided by the monitor may be
impaired if the monitor is used in a manner not
specified by Emerson. Modifications to this monitor,
not expressly approved, will void the warranty.
1.3.7. In Case of Malfunction
Do not continue to use this equipment if there are any
symptoms of malfunction or failure. In the case of
such occurrence, de-energize the power supply and
contact a qualified repair technician or the nearest
Service Center. ONLY the provided knockouts are to
be used for electrical and communication wiring.
Drilling into the box will void the warranty.
1.3.8. RLDS Fusing
1.3.9. Installation Category
Installation Category II, Pollution Degree II, as
defined by UL.
1.3.10. Altitude Limit
RLDS
6,562 ft (2,000 m)
1.3.11. Cleaning
If, during period maintenance inspection it
becomes necessary to clean the outside of the case,
use a
DRY CLOTH
. To avoid shock hazard and/or
equipment damage,
DO NOT USE SOAP AND
WATER.
1.4. Warning and Caution
Conventions
When used in this manual or as labeled on the gas
monitor, the following hazard symbols and/or
associated words are defined as follows.
1.4.1. Warning
This symbol and/or the use of the word
WARNING
indicates a potential hazard from electrical shock
associated with the use of this equipment. It calls
attention to a procedure, practice, condition, or the
like, which if not correctly performed or adhered to,
could result in death or serious injury.
1.4.2. Caution
This symbol and/or use of the word
CAUTION
in
this manual denotes a potential hazard associated with
the use of this equipment. It calls attention to a
procedure, practice, condition, or the like, which if
not correctly performed or adhered to, could result in
minor or moderate bodily injury, and damage to the
equipment.
1.4.3. Important
The use of the word
IMPORTANT
in this manual
calls attention to a procedure, practice, condition, or
the like, which if not correctly performed or adhered
to, could result in incorrect performance of or damage
to the equipment and may void the warranty.
F1, F2
1AMP, 250VAC
FAST ACTING
(Type “F”)
Table 1-1
- Fusing Requirements
WARNING:
CAUTION:
IMPORTANT:
Содержание GW-810-3760
Страница 1: ...Refrigerant Leak Detection System RLDS Installation and Operation Manual 026 1309 Rev 11 ...
Страница 37: ...30 RLDS I O Manual 026 1309 Rev 11 Figure 4 22 Connecting the Gateway to the RS485 Network ...
Страница 84: ...Appendix B System Menu Map B 79 Appendix B System Menu Map ...
Страница 85: ...B 80 RLDS I O Manual 026 1309 Rev 11 ...
