Emerson FloBoss 103, Инструкция по эксплуатации

Страница: 16 / 106

FloBoss 103/104 Instruction Manual
1-10 General Information Revised August-2017
1.2.5 FCC Information
This equipment complies with Part 68 of the FCC rules. Etched on the
modem assembly is, among other information, the FCC certification
number and Ringer Equivalence Number (REN) for this equipment. If
requested, this information must be provided to the telephone company.
This module has an FCC-compliant telephone modular plug. The
module is designed to be connected to the telephone network or
premises’ wiring using a compatible modular jack that is Part 68-
compliant.
The REN is used to determine the quantity of devices that may be
connected to the telephone line. Excessive RENs on the telephone line
may result in the devices not ringing in response to an incoming call.
Typically, the sum of the RENs should not exceed five (5.0). Contact
the local telephone company to determine the total number of devices
that may be connected to a line (as determined by the total RENs).
If this equipment and its dial-up modem causes harm to the telephone
network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. However, if
advance notice is not practical, the telephone company will notify the
customer as soon as possible. In addition, you will be advised of your
right to file a complaint with the FCC if you believe it necessary.
The telephone company may make changes to its facilities, equipment,
operations, or procedures that could affect the operation of the
equipment. If this happens, the telephone company will provide advance
notice so you can make the necessary modifications to maintain
uninterrupted service.
If you experience trouble with this equipment or the dial-up modem,
contact Remote Automation Solutions TechSupport (at 641-754-3923)
for repair or warranty information. If the equipment harms the telephone
network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
1.3 Product Functions
This section describes the functions of the FB100-Series, most of which
are determined by firmware and are configurable using ROCLINK 800.
The features and applications include:
▪
Flow calculations for an orifice meter (AGA3) or rotary or turbine
meter (AGA7)
▪
Extensive historical data archival
▪
Memory logging of 240 alarms and 240 events
▪
Security with local and remote password protection
▪
Logic and sequencing control using a user-defined FST program
▪
Spontaneous-Report-by-Exception (SRBX) capability