manualshive.com logo in svg

Emerson Fisher 4660, Инструкция по эксплуатации

Поделиться
Скачать
Emerson Fisher 4660 Скачать руководство пользователя страница 21

Instruction Manual

D200163X012

4660 Pressure Pilot

June 2017

21

5.  Repeat steps 2 through 4 if both set point assemblies are to be replaced on a high‐low version of the pilot.

6.  Install the front plate and the panel mounting plate (if required).

7.  Align the three posts on the set point indication module(s) with the three holes on the front plate.

8.  Push the set point indication module(s) flush with the front plate and tighten the set screws. Do not overtighten the

set screws.

9.  Perform steps 6 through 11 of the Bourdon tube/flapper assembly replacement procedure.

Parts Ordering

Whenever corresponding with your 

Emerson sales office

 or Local Business Partner about this equipment, always

mention the pilot serial number located on the nameplate (key 76, figure 8) on the rear of the pilot.

  WARNING

Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Automation
Solutions may void your warranty and hazardous area approval, might adversely affect the performance of the instrument,
and could cause personal injury and property damage.

Parts Kits

Description

Part Number

Block‐and‐Bleed Relay Replacement Assembly

(Includes block‐and‐bleed assembly
and keys 53 and 57)

R4660XAVR52

Bourdon Tube/Flapper Assembly

 (Includes

Bourdon tube/flapper and keys 18, 27, 73)

Stainless Steel Bourdon Tube
Bourdon Tube Rating
6.9 bar (100 psig)

R4660XBTFJ2

17.2 bar (250 psig)

R4660XBTFK2

34.5 bar (500 psig)

R4660XBTFL2

69.0 bar (1000 psig)

R4660XBTFM2

103.4 bar (1500 psig)

R4660XBTFN2

344.8 bar (5000 psig)

R4660XBTFR2

517.1 bar (7500 psig)

R4660XBTFS2

NACE Compliant Bourdon Tube
Bourdon Tube Rating
6.9 bar (100 psig)

R4660XBTF12

17.2 bar (250 psig)

R4660XBTF22

34.5 bar (500 psig)

R4660XBTF32

69.0 bar (1000 psig)

R4660XBTF42

103.4 bar (1500 psig)

R4660XBTF52

172.4 bar (2500 psig)

R4660XBTF62

344.8 bar (5000 psig)

R4660XBTF72

517.1 bar (7500 psig)

R4660XBTF82

689.5 bar (10,000 psig)

R4660XBTF92

Key

Description

Part Number

Front Cover Assembly 

(Includes keys 4,

6, 12, and 19)

R4660XFCA22

Output Indicator 

(Includes keys 13, 14,

88, 89, 90, and 91)

R4660X0PUT2

Set Point Assembly

No Set Point (Includes keys 67, 69, 70, and 71)

R4660XSPA32

Low Set Point (Includes set point
assembly and keys 67, 68, 69, 70, and 71)

R4660XSPA22

High Set Point (Includes set point
assembly and keys 67, 68, 69, 70, and 71)

R4660XSPA12

Set Point Indicator

 (Includes set

point assembly and adjustment key)

High Set Point
Bourdon Tube Rating
6.9 bar (100 psig)

R4660XSP1A2

 17.2 bar (250 psig)

R4660XSP1B2

34.5 bar (500 psig)

R4660XSP1C2

69.0 bar (1000 psig)

R4660XSP1D2

103.4 bar (1500 psig)

R4660XSP1E2

172.4 bar (2500 psig)

R4660XSP1F2

344.8 bar (5000 psig)

R4660XSP1G2

517.1 bar (7500 psig)

R4660XSP1H2

689.5 bar (10,000 psig)

R4660XSP1T2

Содержание Fisher 4660

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды