manualshive.com logo in svg

Emerson Fisher 4660, Инструкция по эксплуатации

Поделиться
Скачать
Emerson Fisher 4660 Скачать руководство пользователя страница 13

Instruction Manual

D200163X012

4660 Pressure Pilot

June 2017

13

3.  Slowly turn the low set point knob (key 67) clockwise until the low set point is obtained. The low set point is

obtained when the output pressure of the pilot has changed from full output to zero.

4.  Lock the locking disc (key 69).

Alternate Set Point Adjustment Procedure

This procedure may be used to closely approximate the desired high and low set points when no external pressure
source is available to simulate process pressure. If the pilot does not have the optional output indicator (key 88),
provide a means of indicating the output pressure. Refer to figure 5.

Figure 5. Set Point Adjustment Detail

DOTS

BUTTON

LOCKING DISC

POINTER

THUMBWHEEL

LOW SET POINT
INDICATION

LOCKING ARM

HIGH SET POINT
INDICATION

WITHOUT SET POINT INDICATION

WITH SET POINT INDICATION

48A3549‐F
39A1578‐A
A3300‐1

Refer to the appropriate procedure below.

Note

Make sure that the first six steps of the Preliminary Adjustments procedure found on page 11 have been completed before
proceeding.

High‐Low Construction

1.  Refer to the WARNING at the beginning of the Operating Information section. Make sure the Bourdon tube contains

no pressure.

2.  Connect supply pressure to the pilot.

  WARNING

Before continuing on with step 3, read this Warning:

Natural gas, if used as the supply medium, will seep from the unit into the surrounding atmosphere when the SUPPLY TEST
button is pushed. Personal injury or property damage may result from fire or explosion if preventative measures are not
taken, such as adequate ventilation and the removal of any ignition sources.

3.  Turn on the supply pressure. To check that the supply pressure is on, press the SUPPLY TEST button in the cleanout

assembly (key 54) until a flow sound is heard.

Содержание Fisher 4660

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды